General Information

Stainless Steel 4-Wire Apt. Station. Flush mounts over existing long Auth 777 series Backboxes. Features Oversize Metal Push buttons. Supplied less mounting screws.
The Alpha Communications IS482C (V.I.P. series) apartment intercom stations are designed specifically to minimize vandalism and tenant abuse. Made from .035″ thick solid stainless steel, with oversized metal push-buttons, these stations are built to last. A high sensitivity 3.0″ (76mm) speaker assures clear voice communication, as well as tone signal response. The IS482C is designed to be mounted flush, over existing Auth 777 series (or equivalent) series oversized flush back boxes. Color-coded pigtail wiring makes these stations easy to wire and resists water corrosion at the wiring connections. The advanced electronic design permits use in any size building. A wide variety of optional accessories is available to provide additional functions such as multi-entrance operation, post office door release, silent or delayed door release, etc. Stations are also available in custom sizes and wiring configurations.

Simple push button operation
Made of Rugged Stainless Steel with Oversized Metal Pushbuttons
Tamper and Vandal-Resistant
Easy installation
Automatic privacy
Clear voice quality using high quality 3.0″ voice (and tone) speaker
Simple to operate and Reliable

Dimensions: Height: 12.50″ (318mm)
Width: 5.63″ (143mm)
Depth: 1.50″ (38mm) (When Flush Mounted)
Projects: 0.50″ (13mm) from mounting surface
Construction: Solid .035″ thick stainless steel faceplate.
Controls: Individually replaceable solid metal push-buttons wih self-wiping plated contacts. Identified for TALK, LISTEN and DOOR functions.
Speaker/Mic: 3.00″ (76mm) with voice response. Also used for electronic tone signal.
Mounting: Flush. Pre-punched Mounting holes. Supplied less mounting screws.
ARCHITECTS\’ AND ENGINEERS\’ SPECIFICATIONSThe apartment station shall be Alpha Communications (V.I.P. series) model IS482C or app- roved equal. Station faceplate shall be minimum .035″ solid stainless steel. Momentary action, oversized metal push-buttons shall be provided for TALK, LISTEN and DOOR functions. Button markings shall be imprinted right on the faceplate. The speaker/microphone shall be a 3.00″ (76mm) high-sensitivity type with excellent voice-frequency and tone signaling response. Positive screw terminals shall be provided for wiring terminations.

REQUIRED COMPONENTS:PK543 Amplifier (1 per system) DO-001 (or equivalent) Door Release SS102A or SS105B 16VAC Transformer (for PK543) Lobby Entry Panel (1 per building entry) S1 Screwdriver (if required for lobby panel)OPTIONAL COMPONENTS:
PK502B Multi-Entrance Relay Adaptor (use 1 for each additional entry panel after 1st panel with a maximum of 8 entrances). No additional transformer needed.
PK407A Specialty Relay Adaptor. Used when connecting a door opener other than a 16VAC type to system. One (1) required for each building entry door opener.

WIRING REQUIREMENTS:Apartment riser wiring shall be 3-common #22AWG and 1 selective wire #22AWG, for each station connected to the riser cable. Add 1-#22AWG common wire if 2nd tone signal will be used with optional apartment push buttons, to signal apartments when visitor is at apartment door.

Rate this page