Intercom - AM190

General Information

Modular Style Panel. Natural Anodized Aluminum finish with plastic push buttons and plastic speaker grille. Polycarbonate Name holders supplied along side buttons.
The AM190 series entrance panel is a modular style panel, for use with most open-voice (loud-speaking type) apartment intercom stations. AM190 panels are equipped with a weather-resistant mylar cone speaker protected by a BLACK flame retardant polycarbonate plastic speaker grille. AM190 series panels are available with a variety of module and frame/housing configurations. Modules beginning with the model AM190 are button modules only, with no speaker. AM190 modules are available with 2 to 22 buttons. Modules beginning with the model AM192 have a 45-ohm speaker and can have up to 18 buttons. Along side each plastic push button is a name-holder, made of BLACK flame retardant polycarbonate plastic with a transparent flame retardant polycarbonate plastic cover. Names can easily be inserted using paper tabs (supplied) or optional engraved plastic nameplates (model #AMNP). AM190 and AM192 modules must be installed into a flush or a surface panel frame. Flush panels require an OF190 series frame, with the OH190 series flush housing. Surface panels require anOF190S series surface frame only, and do not require a back box.


Our Lowest Cost Modular Panels
Hands-Free Loud-speaking
Weather-resistant Mylar Speaker
Self-Wiping Plastic Pushbuttons
Ultra Modern Styling
Flush and Surface Models Available
Modular Construction allows use in almost any size buildingSpecifications

Dimensions: Height: 19.00″ (483mm)
Width: Depends upon number of modules wide.
Depth: 4.00″ (102mm) (Flush Housings)
Projects: 2.25″ (58mm) (Surface Mount Frames)
Construction: Anodized extruded aluminum panel/faceplate.
Pushbuttons: Individually replaceable plastic type with self-wiping contacts.
Speaker: 2.50″ (64mm) 45 ohm, mylar cone, Model #SK024.
Housings: OH190 series, for flush style OF190 frames only.

Architects\’ and Engineers\’ Specifications

Entrance panels shall be Alpha Communications/Tektone AM190 series or approved equal, and shall provide push buttons in total. Panels shall be modular style, and shall include an AM192 speaker/button module (and AM190 button only modules as required), as well as a weather-resistant mylar speaker behind a BLACK flame retardant polycarbonate speaker grille. Push buttons shall be individually replaceable plastic type, with self-wiping contacts. Alongside each push button shall be a BLACK flame retardant polycarbonate name holder with transparent flame retardant polycarbonate cover. The panels shall be provided with the appropriate OF190 (Flush) or OF190S (Surface) panel frame. Flush panels shall be supplied with the appropriate (OH190 series) flush back box. Contractor shall provide a model S1 screwdriver, to the building management, for any future maintenance required.

Optional Components

S1 Screwdriver (for installation/maintenance).
OF190S——OR——OF190 Series Surface Panel Frame. Available up to 11 modules.Series Flush Panel Frame. Available up to 11 modules
OH190 Series Flush Housing–not required for surface panels.

Wiring Requirements

Depends upon apartment stations and amplifier being used.

Intercom – AM190
Rate this page