The NH201TVA is used with the HT2001 series S.T.R. handsets, primarily for use in apartment house intercoms, but can be used for small home
and office intercoms.
The Alpha Communications/S.T.R. NH201TVA amplifier/power supplies are used with the S.T.R. HT2001 series 3-wire apartment handset stations to provide intercom amplification and power to operate the electric door opener(s) etc. The NH201TVA operates on 16VAC (30VA) low-voltage Class II wiring. For permanent transformer mounting use our Model #SS106 (U.L. Listed) transformer. For plug-in transformer connection use our Model #SS146 (U.L. Listed) transformer. These NH201TVA amplifier/power supplies are designed to easily surface mount right onto the finished wall by means of customer supplied screws or the convenient plastic \’Din Rail\’ bracket supplied with each power supply. Connections are positive screw terminal type. An optional model NH201TT is also available, which is a p.c. board type unit, with built-in speaker and microphone, to be installed right onto the the back of the speaker grille on the standard S.T.R. type lobby panels. The NH201TT also requires the #SS106 (or SS146) 16VAC transformer for power.
FeaturesEasily Installs Right on Finished Wall Surface or in Customer Supplied HousingOperates on Safe Low-Voltage Class II WiringClear Voice Fidelity with Adjustable Voice Volume ControlConvenient Screw Terminal Connections
Height: 2.375″ (60mm)
Width: 4.25″ (108mm)
Depth: 4.75″ (120mm) from mounting surface
Volume Control: Adjustable potentiometer built-in.
Connections: Screw Terminal Connectors.
Architects\’ and Engineers\’ Specifications
The power supply/amplifier shall be Alpha Communications/S.T.R. model NH201TVA, or approved equal. Amplifier shall operate from a 16VAC (30VA) U.L. Listed transformer (SS106 or SS146). All wiring to power supply/amplifier shall be low-voltage Class II wiring, installed as per all federal, state, and local electrical codes. Power supply/amplifier shall surface mount right to the finished wall and shall be installed in a suitable environment that is free from excessive dirt, dust, temperature, humidity, grease and water. Power supply/amplifier shall provide the intercom amplification and signaling power for proper system operation. For most secure installation,
power supply should be installed into a lockable equipment cabinet/housing. Power supply/amplifier shall be installed a safe distance from any source of electrical interference.
DO-001 (or equivalent) 16VAC Door Release.
TU1007A Multi Entrance Audio Adaptor. Used when switching audio (intercom) and door release
between two (2) or more entrance stations. Used in addition to system amplifier. Use
one (1) for (2) entrances, use two (2) for (3-4) entrances, use three (3) for (5-6)
entrances and use four (4) for (7-8) entrances. No additional transformer needed.
PK407A Specialty Relay Adaptor. Used when connecting a door opener other than a 16VAC
type to system. One (1) required for each building entry door opener.