Keypad - AM-KP


Wired keypad to allow access via a 1-6 digit entry code. Housed in a
weatherproof metal enclosure.

This wired
keypad (Model AM-KP) is an outdoor entry device that activates one relay
channel. When a learned one-to-eight-digit access code is entered, the AM-KP
causes a Linear access controller to activate one of its four relays, which in
turn, performs an action, such as releasing a door strike/magnetic lock or
triggering a gate operator.

The keypad
is built for extended service in tough commercial access control environments,
outdoors or inside. It is housed in a weather-resistant, cast aluminum case. A
built-in piezo sounder provides audible confirmation
to the user when a key is pressed. A red LED indicates ЂњpowerЂќ and switches to
green when a valid entry code is entered. A separate yellow LED illuminates
when the keypad is licked out. Lockout can be programmed to occur after one to
seven unsuccessful entry code attempts and will remain
in that condition for one full minute.

A built-in downlight provides keypad illumination in even the darkest
conditions. It is completely programmable: on all the time or timed intervals.
The keypad is powered by a system controller and can be located up to 500 feet
away. A local external 12 Vdc power supply is also
available. A keylock secures the keypad to the
mounting backplate.


For use outdoors or indoors.
1-to-8-digit user selectable
access codes.
Programmable downlighting.
Separate LEDs
for “power/access granted” and “locked out”
Pedestal or wall mounting.
Cast aluminum, environmentally
protected housing.
Keylock secures keypad to mounting backplate.

Keypad – AM-KP
Rate this page