Fingerprint Reader - V-Smart

General Information

?

Bioscrypt V-Smart is a dual factor solution that combines a fingerprint and smart card reader for access control. It uses standard contact-less smart card technology and allows for Wiegand communication formats up to 64 bits.

?

Benefits

?

• Portable database - fingerprint templates are stored on the smart card not the reader
• Provides dual-factor authentication? ?a smart card; something you have, and a biometric
• Advanced patented fingerprint algorithm maintains accuracy and is robust when faced with scarred, dirty, wet or dry fingers
• Designed to work with existing access control systems
• Eliminates redundant wiring for managing biometric templates, because the templates are stored on the card
• Flexible communication options supporting Wiegand formats up to 64 bits
• Supports MIFARE? contact-less smart card technology
• Unlimited number of users
• Compact modular design
• Double gang surface mount
• Convenient VeriAdmin software package provides user friendly fingerprint template enrollment and administration capabilities
• Weather resistant housing
• Intuitive user interface with red, amber and green LED and tone signals

?

Specifications

?

• Dimensions: Length: 130mm (5.12)
• Width: 118mm (4.65)
• Depth: 63.5mm (2.5)
• Communications: Pigtail wire connection for RS232, RS485, Wiegand IN/OUT
• Enrollment Time: <5 seconds
• Verification Time: <2 seconds
• Equal Error Rate: 0.1%
• Template Size: <350 bytes
• Current Draw: Idle: 0.20 amps @ 12V
• Identify / Enroll: 0.25 amps @ 12V
• Voltage: 8V to 12V DC

?

?

• Flat surface, double gang compatible. Mounting plate will accept No.6 screws or bolts.
• Clearance hole diameter is 0.155.

?

V-SMART-G: Fingerprint reader with internal contact-less MIFARE? smart card reader

VDSPLY: Stand, datasheets, 5 MIFARE? cards, power supply

BIO-SDK: Common Development Software CD (supports MV1200, V-Prox, V-Flex, V-Smart, V-Pass)

ADMIN-KIT: VeriAdmin CD, setup guide documentation, aux programming cable

CARDS SUPPORTED: GemEasy 8000, HID 1430 and HID 1431 (request HID cards un-programmed on the MIFARE? side)